Get Blessing TV under DSTV General Settings of Public Channels

NOTE: BLESSING TV is number 38.

NAMED: BLESS

 

Steps to follow

 

Step 1:

Setting up of your decoder, make sure that your decoder software is updated to the latest version. To do this update: Press the Menu button. Select “Advanced Options” and press OK. Select “DSD UPGRADE” and press OK. The decoder should start to upgrade the software now.
Step 2:

Press menu Select “Advanced Options” Select “Dish Installation” Enter the pin “9949” Select “Network Configuration”
Step 3:

Network and frequency setup

NB: Leave “Network 1 Setup (Home)” unchanged!!

Select “Network 2 Setup”Set Signal Setup to “Enabled” by selecting it, and moving left or right Set Frequency to “11170” Set Symbol Rate to “26652 Set Polarization to “Vertical” Set FEC to “3/4” Select “Accept these settings”

Select “Network 3 Setup” Set Signal Setup to “Enabled” Set Frequency to “11625” Set Symbol Rate to “15000 Set Polarization to “Vertical” Set FEC to “3/4” Select “Accept these settings”

Select “Network 4 Setup” Set Signal Setup to “Enabled” Set Frequency to “11674” Set Symbol Rate to “26652 Set Polarization to “Vertical” Set FEC to “5/6” Select “Accept these settings”

Select “Network 5 Setup” Set Signal Setup to “Enabled” Set Frequency to “12522” Set Symbol Rate to “26657 Set Polarization to “Horizontal” Set FEC to “1/2” Select “Accept these settings”

Select “Network 6 Setup” Set Signal Setup to “Enabled” Set Frequency to “12562” Set Symbol Rate to “26657 Set Polarization to “Horizontal” Set FEC to “1/2” Select “Accept these settings”

Select “Network 7 Setup” Set Signal Setup to “Enabled” Set Frequency to “12682” Set Symbol Rate to “26657 Set Polarization to “Horizontal” Set FEC to “1/2” Select “Accept these settings”

Select “Network 8 Setup” Set Signal Setup to “Enabled” Set Frequency to “12722” Set Symbol Rate to “26657 Set Polarization to “Vertical” Set FEC to “1/2” Select “Accept these settings”

Step 4:

Exit once to go back to the “Dish Installation” menu Select “Scan All Networks” Your decoder will go into scanning mode and might take a while to scan all 9 networks. Do not interrupt the process even if it seams to take longer than you expected! Once completed, your picture will return as normal

Posted in Blessing TV and tagged .